Allied Telesis AT-GS908M User Manual

Chapter 17: DHCP Snooping Commands
312 Section III: Layer 2 Switching
DISABLE DHCPSNOOPING LOG
Syntax
disable dhcpsnooping log=arpsecurity|macfilter
Parameters
log
Specifies a log event. To specify multiple log events, use a comma
to separate them.
arpsecurity
Specifies the ARP security log. Log messages are issued when an
ARP packet is discarded because the source address is not in the
DHCP Snooping table.
macfilter
Specifies the MAC filter log. Log messages are issued when a
DHCP packet is discarded due to MAC filtering.
Description
Use this command to disable logging for DHCP Snooping. By default,
logging for DHCP Snooping is disabled.
Confirmation Command
“SHOW DHCPSNOOPING” on page 328
Example
The following command disables ARP security logging:
Manager > disable dhcpsnooping log=arpsecurity

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English