Allied Telesis AT-GS908M User Manual

AT-FS900M Series CLI ReferenceAT-GS900M Series CLI Reference
Section III: Layer 2 Switching 361
Chapter 20
Rapid Spanning Tree Protocol (RSTP)
Commands
This Rapid Spanning Tree Protocol commands are summarized in
Table 38and described in this chapter.
Table 38. Rapid Spanning Tree Protocol Commands
Command Description
“DISABLE STP” on page 362 Disables RSTP on individual ports or the
switch.
“ENABLE STP” on page 363 Enables RSTP on individual ports or the
switch.
“PURGE STP” on page 364 Resets all RSTP parameter settings to
their default values.
“SET STP” on page 365 Sets the RSTP bridge settings.
“SET STP PORT” on page 368 Sets the RSTP port settings.
“SHOW STP” on page 371 Displays the RSTP bridge settings.
“SHOW STP PORTCONFIG” on
page 374
Displays the RSTP port settings.
“SHOW STP PORTSTATE” on
page 375
Displays the RSTP status of the ports.

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English