Allied Telesis AT-GS908M User Manual

Chapter 21: Multiple Spanning Tree Protocol (MSTP) Commands
380 Section III: Layer 2 Switching
CREATE MSTP MSTI
Syntax
create mstp msti= instance priority= priority
Parameters
instance
Specifies MST instance ID. The range is 1 to 15.
priority
Specifies bridge priority for the MST instance. The range is 0 to
65535. The default value is 32768. The smaller number has higher
priority to be a root bridge. The switch converts the specified
number into an increment of 4096, which is close to and smaller
than the specified number. For example, when you specifies
10,000, the switch sets the priority to 8192.
Description
Use this command to create a MST instance. One switch or one region
can have up to 15 MST instances.
Confirmation Command
“SHOW MSTP” on page 399
Examples
The following command creates MST instance 1:
create mstp msti=1

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English