AT-GS900M Series Command Reference
Section IV: Security and Traffic Control 477
DESTROY QOS TRAFFICCLASS
Syntax
destroy qos trafficclass=
traffic_class_list
|all
Parameters
traffic_class_list
Specifies a list of traffic classes. To specify multiple traffic classes,
use a comma (,) to separate them. To specify a range of traffic
classes, use a hyphen (-).
Description
Use this command to delete traffic classes.
Confirmation Command
“SHOW QOS TRAFFICCLASS” on page 496
Example
The following command deletes traffic class 1:
Manager > destroy qos trafficclass=1
To Next Page
Loading...
