Allied Telesis AT-GS908M User Manual

AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 381
DELETE MSTP MSTI VLAN
Syntax
delete mstp msti= instance vlan= vlan_list |all
Parameters
msti
Specifies an MST instance that the debug option is enabled for.
instance
Specifies MST instance ID. The range is 1 to 15.
vlan_list
Specifies a list of VLANs. To specify multiple VLANs, use a comma
(,) to separate them. To specify a range of VLANs, use a hyphen
(-).
Description
Use this command to release a VLAN from association with a MST
instance. When a VLAN is released from the associated MST instance, the
VLAN is automatically returned to Common and Internal Spanning Tree
(CIST).
Confirmation Command
“SHOW MSTP” on page 399
Examples
The following command releases VLAN 10 from the associated MST
instance 1:
delete mstp msti=1 vlan=10

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English