AT-GS900M Series Command Reference
Section IV: Security and Traffic Control 473
DELETE QOS TRAFFICCLASS
Syntax
delete qos trafficclass=
traffic_class
[flowgrouplist=
flow_list
|none]
Parameters
traffic_class
Specifies a policy number.
flowgrouplist
Specifies a list of flow groups. To specify multiple flow groups, use
a comma (,) to separate them. To specify a range of flow groups,
use a hyphen (-). The default setting is none.
Description
Use this command to remove a flow group from the traffic class.
Confirmation Command
“SHOW QOS TRAFFICCLASS” on page 496
Example
The following command deletes flow groups 1 to 3 from traffic class 1:
Manager > delete qos trafficclass=1 flowgrouplist=1-3
To Next Page
Loading...
