AT-GS900M Series CLI Reference
Section II: Switch Management 97
DISABLE LOG OUTPUT
Syntax
disable log output[=permanent|syslog]
Parameters
permanent
Specifies the permanent log to disable.
syslog
Specifies the syslog to disable.
Description
Use this command to disable the permanent log, the syslog, or both.
Confirmation Command
“SHOW LOG” on page 106
Example
The following command disables both the permanent log and syslog:
manager > disable log output
The following command disables the permanent log:
manager > disable log output=permanent
To Next Page
Loading...
