AT-GS900M Series CLI Reference
Section I: Getting Started 51
SET PASSWORD
Syntax
set password
Parameters
None
Description
Use this command to change the login password. The password can be up
to 16 alphanumeric characters. Special characters and spaces are
allowed. The password is case-sensitive. When no password is entered,
you can login without password.
Confirmation Command
“SHOW SYSTEM” on page 58
Example
The following command prompts you to enter passwords. At the prompt,
type your new password.
Manager > set password
Old password: *****
New password: *******
Confirm : *******
Password has been changed.
To Next Page
Loading...
Need help?
General
