AT-GS900M Series CLI Reference
Section II: Switch Management 101
PURGE LOG
Syntax
purge log output[=permanent|syslog]
Parameters
permanent
Specifies the permanent log to delete its setting and counter.
syslog
Specifies the syslog to delete its setting and counter.
Description
Use this command to delete the log settings and counters.
Confirmation Command
“SHOW LOG” on page 106
Example
The following command deletes the settings and log counters:
Manager > purge log
The following command deletes the setting and counter of the syslog:
Manager > purge log=syslog
To Next Page
Loading...
