AT-GS900M Series CLI Reference
Section II: Switch Management 105
SHOW CRASHLOG
Syntax
show crashlog
Parameters
None
Description
Use this command to display crash logs in the Non-Volatile (NV) memory
on the switch.
An example of the command output is shown in Figure 12.
Figure 12. SHOW CRASHLOG Command
Example
The following command displays crash logs:
Manager> show crashlog
mC0DEDEAD 80000484 00000000 00000001
00000002 00000003 00000004 00000005
DEADBEEF DEADBEEF 00000006
0000002C B6
To Next Page
Loading...
