AT-GS900M Series Command Reference
Section III: Layer 2 Switching 321
RESET DHCPSNOOPING DATABASE
Syntax
reset dhcpsnooping database [port=
port_list
|all]
Parameters
port_list
Specifies a list of ports. To specify multiple ports, use a comma (,)
to separate them. To specify a range of ports, use a hyphen (-).
all
Specifies all the switch ports.
Description
Use this command to delete dynamic entires for the specified port from the
DHCP Snooping table.
Confirmation Command
“SHOW DHCPSNOOPING DATABASE” on page 330
Example
The following command delete dynamic entires on port 1 and 2 from the
DHCP Snooping table:
Manager > reset dhcpsnooping database port=1-2
To Next Page
Loading...
