AT-GS900M Series Command Reference
Section IV: Security and Traffic Control 471
DELETE QOS FLOWGROUP
Syntax
delete qos flowgroup=
flow_group_number
classifierlist=
classifier_list
|none
Parameters
flow_group_number
Specifies a flow group number.
classifier_list
Specifies a list of classifiers. To specify multiple classifiers, use a
comma (,) to separate them. To specify a range of classifiers, use
a hyphen (-). The default setting is none.
Description
Use this command to remove a classifier from the flow group.
Confirmation Command
“SHOW QOS FLOWGROUP” on page 493
Example
The following command deletes classifiers 1 to 3 from flow group 1:
Manager > delete qos flowgroup=1 classifierlist=1-3
To Next Page
Loading...
