Allied Telesis AT-GS908M User Manual

AT-GS900M Series CLI Reference
Section IV: Security and Traffic Control 501
DELETE PORTAUTH PORT SUPPLICANTMAC
Syntax
delete portauth port= port_number [supplicantmac= mac_add]
Parameters
port_number
Specifies a port number.
supplicantmac
Specifies the MAC address of the supplicant. When ommited this
parameter, all the supplicant MAC address on the port are deleted.
mac_add
Specifies a MAC address or mask in the format: ff-ff-ff-ff-ff-ff.
Description
Use this command to delete the MAC address of the supplicant specified
on the port.
Confirmation Command
“SHOW PORTAUTH” on page 532
Example
The following command deletes all supplicant MAC addresses on port 2:
Manager > delete portauth port=2

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English