AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 209
Chapter 13
VLAN Commands
The VLAN commands are summarized in Table 29.
Table 29. VLAN Commands
Command Description
“ADD VLAN PORT” on page 210 Assigns the VLAN to ports either tagged
or untagged.
“CREATE VLAN” on page 212 Creates a VLAN.
“DELETE VLAN PORT” on
page 213
Deletes a port from a VLAN.
“DESTROY VLAN” on page 214 Deletes a VLAN from the switch.
“SET VLAN PORT” on page 215 Changes tagged or untagged VLAN to
the port.
“SHOW VLAN” on page 216 Displays information about the specified
VLANs.
To Next Page
Loading...
Need help?
General
