Allied Telesis AT-GS908M User Manual

AT-GS900M Series CLI Reference
Section II: Switch Management 179
Chapter 11
RADIUS Authentication Server
Commands
The RADIUS server commands are summarized in Table 24.
Table 24. RADIUS Server Commands
Command Description
“ADD RADIUSSERVER SERVER”
on page 180
Adds a RADIUS server to the list.
“DELETE RADIUSSERVER
SERVER” on page 181
Deletes the RADIUS server from the list.
“DISABLE
RADIUSACCOUNTING” on
page 182
Disables the accounting feature on
RADIUS servers.
“ENABLE
RADIUSACCOUNTING” on
page 183
Enables the accounting feature on
RADIUS servers.
“SET AUTHENTICATION” on
page 184
Specifies the settings of RADIUS servers
for authentication.
“SET RADIUS” on page 185 Specifies the settings of RADIUS servers
for authentication.
“SET RADIUSACCOUNTING” on
page 186
Specifies the settings of RADIUS servers
for accounting.
“SHOW AUTHENTICATION” on
page 188
Displays a list of RADIUS servers and
their settings.
“SHOW RADIUS” on page 190 Displays a list of RADIUS servers and
their settings.
“SHOW RADIUSACCOUNTING”
on page 191
Displays the settings of RADIUS servers
for accounting.

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English