Allied Telesis AT-GS908M User Manual

Chapter 19: Power Saving Commands
356 Section III: Layer 2 Switching
SET TRIGGER
Syntax
set trigger= trigger_id psmode=sleep|ledoff|portoff|poeoff
starttime=
time [endtime= time ] [startdate= date ]
[enddate=
date ] [days= day_list ] [port= port_list |all]
[name=
stirng ] [poetarget=alliedtelesis-ap|other]
[state=enabled|disabled] [test=yes|no|on|off]
Parameters
trigger_id
Specifies a power saving trigger ID.
psmode
Specifies the power saving mode.
sleep
The switch turns off and is in the standby mode.
ledoff
The switch turns off the led.
portoff
The switch shuts down the port.
poeoff
The switch stops supplying power to a PoE PD.
starttime
Specifies the time to start the trigger.
endtime
Specifies the time to end the trigger.
time
Specifies time in the hh:mm format.
startdate
Specifies the start date that the trigger becomes effective.
enddate
Specifies the end date that the trigger becomes effective.
date
Specifies a date in the yyy-mm-dd format.
days
Specifies days that the trigger is effective.

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English