Allied Telesis AT-GS908M User Manual

Chapter 14: Switching Commands
268 Section III: Layer 2 Switching
SHOW SWITCH COUNTER
Syntax
show switch counter
Parameters
None
Description
Use this command to display statistics on the switch. An example of the
command output is shown in Figure 36.
Figure 36. SHOW SWITCH COUNTER Command
Example
The following example displays statistics on the switch:
Manager > show switch counter
Switch Counters
----------------------------------------------
Receive Transmit
packets : 0 packets : 0
errors : 0 errors : 0
----------------------------------------------

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English