Allied Telesis AT-GS908M User Manual

Chapter 7: SNMP Commands
120 Section II: Switch Management
DISABLE INTERFACE LINKTRAP
Syntax
disable interface = if_index | interface |all linktrap
Parameters
if_index
Specifies a switch port number.
ifterface
Specifies a port interface name. The port interface name is a prefix
of port followed by a port number, such as port1, port2 and port16.
all
Specifies all port interfaces.
Description
Use this command to disable generating SNMP traps when the link is up
or down at the specified port interface. By default, generating SNMP traps
is disabled when the link is up or down at port interfaces.
Confirmation Command
“SHOW INTERFACE” on page 134
Example
The following command disables generating traps when the link is up or
down at port1:
Manager > disable interface=port1 linktrap

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English