Chapter 3: Basic CLI Management Commands
54 Section I: Getting Started
SET TIME
Syntax
set Time=
time
|date=
date
Parameter
time
Specifies the system time. The format is hh:mm:ss.
date
Specifies the system date. The format is yyyy-mm-dd.
Description
Use this command to specify the system time and system date.
Confirmation Command
“SHOW TIME” on page 61
Example
The following command specifies the system time to 9:15AM and system
date to July 7, 2014:
Manager > set time=09:15:00 date=2014-07-07
The following command changes only the system time:
Manager > set time=08:45:00
To Next Page
Loading...
Need help?
General
