Chapter 9: Telnet Commands
164 Section II: Switch Management
SET ASYN
Syntax
set asyn login=on|off|yes|no|true|false
Parameters
login
Enables or disables logging in from the Console port.
on, yes, true
Enables logging in from the Console port.
off, no, false
Disables logging in from the Console port.
Description
Use this command to enable or disable logging in from the Console port.
The command execution becomes effective once you logged out.
Confirmation Command
“SHOW ASYN” on page 168
“SHOW TELNET” on page 171
Example
The following command disables logging in from the Console port:
Manager > set asyn login=no
To Next Page
Loading...
