AT-GS900M Series CLI Reference
Section I: Getting Started 55
SHOW CPU
Syntax
show cpu
Parameter
None
Description
Use this command to display the CPU usage. See Figure 2 for an example
of the command output.
Figure 2. SHOW CPU Command
Example
The following command displays the CPU usage of the switch:
manager > show cpu
CPU Utilisation ( as a percentage )
----------------------------------------
Average over last second ........... 9
Average over last minute ........... 8
Average over last 5 minutes ........ 5
Average over last 15 minutes ....... 6
----------------------------------------
To Next Page
Loading...
