Allied Telesis AT-GS908M User Manual

AT-GS900M Series CLI Reference
Section IV: Security and Traffic Control 413
SET ACCESS FILTER ENTRY
Syntax
set access filter=snmp|ftp|telnet|http|icmp|global
entry=
entry_number [ipaddress= ip_address ] [mask= mask ]
[action=pass|discard] [port=
port_list |all]
Parameters
filter
Specifies one of the access filter groups to the access filter entry.
snmp
Specifies the entry to add to the group snmp.
ftp
Specifies the entry to add to the group ftp.
telnet
Specifies the entry to add to the group telnet.
http
Specifies the entry to add to the group http.
icmp
Specifies the entry to add to the group icmp.
global
Specifies the entry to add to all the groups.
entry_number
Specifies the number of the access filter entry.
ip_address
Specifies the IPv4 address of the target.
mask
Specifies the mask to filter the IPv4 address.
action
Specifies the action when a packet matches the access filter.
pass
Passes the packet when it matches the access filter.
discard
Discard the packet when it matches the access filter.

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English