AT-GS900M Series CLI Reference
Section I: Getting Started 27
Starting a Remote Management Session Using the Web Browser
The switch has an HTTP server installed. You can use HTTP to manage
the switch through the Web browser.
To start a HTTP management session, perform the following procedure:
1. Assign a management IP address to the switch.
See “Adding a Management IP Address” on page 28.
2. Enable the HTTP server on the switch.
See “ENABLE HTTP SERVER” on page 175.
3. Open a web browser on the management workstation.
4. Enter the management IP address of the switch followed by htt;//.
For example, http://192.168.1.1
The AT-GS900 series switch login page is displayed.
5. Enter a user name and password of a management account on the
switch.
The switch comes with one management account. The user name is
“manager” and the password is “friend.“User names and passwords
are case-sensitive.
The HTTP server is disabled on the switch by default.
To Next Page
Loading...
Need help?
General
