Allied Telesis AT-GS908M User Manual

AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 393
SET MSTP CIST
Syntax
set mstp cist priority= priority
Parameters
priority
Specifies the bridge priority for CIST. The smaller number has
higher priority to be a root bridge.The range is 0 to 65535. The
default value is 32768. The switch converts the specified number
into an increment of 4096, which is close to and smaller than the
specified number. For example, when you specifies 10,000, the
switch sets the priority to 8192.
Description
Use this command to set the bridge priority for Common and Internal
Spanning Tree (CIST).
Confirmation Command
“SHOW MSTP” on page 399
Examples
The following command sets the bridge priority for CIST to 4096:
set mstp cist priority=4096

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English