Allied Telesis AT-GS908M User Manual

AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 383
DISABLE MSTP
Syntax
disable mstp [port= port_list |all]
Parameters
port
Specifies one or more ports that MSTP is disabled on. To disable
MSTP on a trunk port, you must specify all members in the trunk
group.
port_list
Specifies a list of ports. To specify multiple ports, use a comma (,)
to separate them. To specify a range of ports, use a hyphen (-).
all
Specifies all the switch ports.
Description
This command is used to disable the Multiple Spanning Tree Protocol
(MSTP) on the selected ports or the switch. By default MSTP is disabled.
Confirmation Command
“SHOW MSTP” on page 399
Examples
The following command disables MSTP on ports 5 and 6:
disable mstp port=5-6
The following command disables MSTP on the switch:
disable mstp

Allied Telesis AT-GS908M Specifications

General

Brand	Allied Telesis
Model	AT-GS908M
Category	Switch
Language	English