Chapter 17: DHCP Snooping Commands
304 Section III: Layer 2 Switching
“RESET DHCPSNOOPING
DATABASE” on page 321
Deletes dynamic entires for the specified port
from the DHCP Snooping table.
“SET DHCPSNOOPING
CHECKINTERVAL” on page 322
Changes an interval to check the DHCP
Snooping table.
“SET DHCPSNOOPING
CHECKOPTION” on page 323
Specifies the conditions to delete entires from the
DCHP Snooping table.
“SET DHCPSNOOPING
MACFILTER” on page 324
Changes a MAC address filtering entry.
“SET DHCPSNOOPING PORT”
on page 326
Changes port settings for DHCP Snooping.
“SHOW DHCPSNOOPING” on
page 328
Displays information about DHCP Snooping.
“SHOW DHCPSNOOPING
COUNTER” on page 329
Displays statistics information for DHCP
Snooping.
“SHOW DHCPSNOOPING
DATABASE” on page 330
Displays the DHCP Snooping table.
“SHOW DHCPSNOOPING
MACFILTER” on page 331
Displays MAC address filters.
“SHOW DHCPSNOOPING PORT”
on page 332
Displays the settings of DHCP Snooping for the
specified port.
Table 35. DHCP Snooping Commands (Continued)
Command Description
To Next Page
Loading...
Need help?
General
