Chapter 18: Power Over Ethernet (PoE) Commands
340 Section III: Layer 2 Switching
When the power management mode is actual, the maximum
power supplied to the port is 15400 mili-watts on the port
connected to the PD whose class is 0 to 3 even if the power limit is
set to larger than 15400mili-watts.
Confirmation Command
“SHOW POE” on page 342
Example
The following command specifies the priority high and power limit 5000
mili-watts on port 1 and port 2:
Manager > set poe port=1-2 priority=high powerlimit=5000
To Next Page
Loading...
