User's Manual 292 Document #: LTRT-68822
Mediant 2000
Parameter Description
EMS: Prefix/Suffix To Add
[Suffix2Add]
telephone number. For example, if you enter 00 and the phone
number is 1234, the new number is 123400.
Web/EMS: Number of
Digits to Leave
[LeaveFromRight]
Defines the number of digits that you want to keep from the right of
the phone number. For example, if you enter 4 and the phone number
is 00165751234, then the new number is 1234.
Web: NPI
EMS: Number Plan
[NumberPlan]
Defines the Numbering Plan Indicator (NPI).
 [0] Unknown (default)
 [9] Private
 [1] E.164 Public
 [-1] Not Configured = value received from PSTN/IP is used
Notes:
 This parameter is applicable only to number manipulation tables
for IP-to-Tel calls.
 NPI can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.
 For more information on available NPI/TON values, see
Numbering Plans and Type of Number on page 307.
Web: TON
EMS: Number Type
[NumberType]
Defines the Type of Number (TON).
 If you selected 'Unknown' for the NPI, you can select Unknown [0].
 If you selected 'Private' for the NPI, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PISN Specific [3] or
Level 0 Regional (Local) [4].
 If you selected 'E.164 Public' for the NPI, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber
[4] or Abbreviated [6].
The default is 'Unknown'.
Notes:
 This parameter is applicable only to number manipulation tables
for IP-to-Tel calls.
 TON can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.
 For more information on available NPI/TON values, see
Numbering Plans and Type of Number on page 307.
Web: Presentation
EMS: Is Presentation
Restricted
[IsPresentationRestricted
]
Enables caller ID.
 [0] Allowed = Sends Caller ID information when a call is made
using these destination/source prefixes.
 [1] Restricted = Restricts Caller ID information for these prefixes.
Notes:
 This field is applicable only to number manipulation tables for
source phone number manipulation.
 If this field is set to Restricted and the 'Asserted Identity Mode'
(AssertedIdMode) parameter is set to Add P-Asserted-Identity,
the From header in the INVITE message includes the following:
From: 'anonymous' <sip: anonymous@anonymous.invalid> and
'privacy: id' header.
To Next Page
Loading...
Need help?
General
