AudioCodes Mediant 2000 User Manual

Version 6.6 617 Mediant 2000
User's Manual 45. Configuration Parameters Reference
Parameter Description
Multiple Differentiated Services Code Points (DSCP) per MLPP Call Priority Level
(Precedence) Parameters
The MLPP service allows placement of priority calls, where properly validated users can preempt
(terminate) lower-priority phone calls with higher-priority calls. For each MLPP call priority level, the
DSCP can be set to a value from 0 to 63. The Resource Priority value in the Resource-Priority SIP
header can be one of the following:
MLPP Precedence Level Precedence Level in Resource-Priority SIP Header
0 (lowest) routine
2 priority
4 immediate
6 flash
8 flash-override
9 (highest) flash-override-override
Web/EMS: RTP DSCP for
MLPP Routine
[MLPPRoutineRTPDSCP
]
Defines the RTP DSCP for MLPP Routine precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global parameter
PremiumServiceClassMediaDiffServ or as defined in IP Profiles per call.
Web/EMS: RTP DSCP for
MLPP Priority
[MLPPPriorityRTPDSCP
]
Defines the RTP DSCP for MLPP Priority precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global parameter
PremiumServiceClassMediaDiffServ or as defined in IP Profiles per call.
Web/EMS: RTP DSCP for
MLPP Immediate
[MLPPImmediateRTPDS
CP]
Defines the RTP DSCP for MLPP Immediate precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global parameter
PremiumServiceClassMediaDiffServ or as defined in IP Profiles per call.
Web/EMS: RTP DSCP for
MLPP Flash
[MLPPFlashRTPDSCP]
Defines the RTP DSCP for MLPP Flash precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global parameter
PremiumServiceClassMediaDiffServ or as defined in IP Profiles per call.
Web/EMS: RTP DSCP for
MLPP Flash Override
[MLPPFlashOverRTPDS
CP]
Defines the RTP DSCP for MLPP Flash-Override precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global parameter
PremiumServiceClassMediaDiffServ or as defined in IP Profiles per call.
Web/EMS: RTP DSCP for
MLPP Flash-Override-
Override
[MLPPFlashOverOverRT
PDSCP]
Defines the RTP DSCP for MLPP Flash-Override-Override precedence
call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global parameter
PremiumServiceClassMediaDiffServ or as defined in IP Profiles per call.

AudioCodes Mediant 2000 Specifications

General

Brand	AudioCodes
Model	Mediant 2000
Category	Gateway
Language	English