EasyManuals Logo

AudioCodes Mediant 2000 User Manual

AudioCodes Mediant 2000
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #662 background imageLoading...
Page #662 background image
User's Manual 662 Document #: LTRT-68822
Mediant 2000
Parameter Description
Source Number and also as the Tel Display Name, and
Presentation is set to Allowed (0). If no Display Name is received
from IP, the IP Source Number is used as the Tel Source Number
and Presentation is set to Restricted (1).
For example: When 'From: 100 <sip:200@201.202.203.204>' is
received, the outgoing Source Number and Display Name are set to
'100' and the Presentation is set to Allowed (0).
When 'From: <sip:100@101.102.103.104>' is received, the outgoing
Source Number is set to '100' and the Presentation is set to
Restricted (1).
Web: Use Routing Table
for Host Names and
Profiles
EMS: Use Routing Table
For Host Names
[AlwaysUseRouteTable]
Determines whether to use the device's routing table to obtain the
URI host name and optionally, an IP profile (per call) even if a Proxy
server is used.
ï‚§ [0] Disable = (Default) Don't use internal routing table.
ï‚§ [1] Enable = Use the Outbound IP Routing Table.
Notes:
ï‚§ This parameter appears only if the 'Use Default Proxy' parameter
is enabled.
ï‚§ The domain name is used instead of a Proxy name or IP address
in the INVITE SIP URI.
Web/EMS: Tel to IP
Routing Mode
[RouteModeTel2IP]
For a description of this parameter, see 'Configuring Outbound IP
Routing Table' on page 309.
Outbound IP Routing Table
Web: Outbound IP Routing
Table
EMS: SIP Routing > Tel to
IP
[Prefix]
This table parameter configures the Outbound IP Routing Table for
routing Tel-to-IP and IP-to-IP
calls. The format of this parameter is as
follows:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId,
PREFIX_MeteringCode, PREFIX_DestPort, PREFIX_SrcIPGroupID,
PREFIX_DestHostPrefix, PREFIX_DestIPGroupID,
PREFIX_SrcHostPrefix, PREFIX_TransportType,
PREFIX_SrcTrunkGroupID, PREFIX_DestSRD,
PREFIX_CostGroup, PREFIX_ForkingGroup;
[\PREFIX]
For example:
PREFIX 0 = *, domain.com, *, 0, 255, $$, -1, , 1, , -1, -1, -1,,;
PREFIX 1 = 20, 10.33.37.77, *, 0, 255, $$, -1, , 2, , 0, -1,,;
Note: For a detailed description of this table, see 'Configuring
Outbound IP Routing Table' on page 309.
Inbound IP Routing Table
Web: Inbound IP Routing
Table
EMS: SIP Routing > IP to
Hunt
[PSTNPrefix]
This table parameter configures the routing of IP-to-Trunk Groups (or
inbound IP Groups). The format of this parameter is as follows:
[PSTNPrefix]
ORMAT PstnPrefix_Index = PstnPrefix_DestPrefix,
PstnPrefix_TrunkGroupId, PstnPrefix_SourcePrefix,
PstnPrefix_SourceAddress, PstnPrefix_ProfileId,
PstnPrefix_SrcIPGroupID, PstnPrefix_DestHostPrefix,
PstnPrefix_SrcHostPrefix, PstnPrefix_SrcSRDID,
PstnPrefix_TrunkId;

Table of Contents

Other manuals for AudioCodes Mediant 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 2000 and is the answer not in the manual?

AudioCodes Mediant 2000 Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 2000
CategoryGateway
LanguageEnglish

Related product manuals