AudioCodes Mediant 2000 User Manual

Version 6.6 675 Mediant 2000
User's Manual 45. Configuration Parameters Reference
Parameter Description
CallingNameMapIp2Tel_DestinationPrefix,
CallingNameMapIp2Tel_SourcePrefix,
CallingNameMapIp2Tel_CallingNamePrefix,
CallingNameMapIp2Tel_SourceAddress,
CallingNameMapIp2Tel_RemoveFromLeft,
CallingNameMapIp2Tel_RemoveFromRight,
CallingNameMapIp2Tel_LeaveFromRight,
CallingNameMapIp2Tel_Prefix2Add,
CallingNameMapIp2Tel_Suffix2Add;
[ \CallingNameMapIp2Tel ]
Note: For a detailed description of this table, see 'Configuring SIP
Calling Name Manipulation' on page 294.
Calling Name Manipulations Tel-to-IP Table
[CallingNameMapTel2Ip]
This table parameter configures rules for manipulating the calling name
(caller ID) for Tel-to-IP calls. This can include modifying or removing the
calling name.
[ CallingNameMapTel2Ip ]
FORMAT CallingNameMapTel2Ip_Index =
CallingNameMapTel2Ip_DestinationPrefix,
CallingNameMapTel2Ip_SourcePrefix,
CallingNameMapTel2Ip_CallingNamePrefix,
CallingNameMapTel2Ip_SrcTrunkGroupID,
CallingNameMapTel2Ip_SrcIPGroupID,
CallingNameMapTel2Ip_RemoveFromLeft,
CallingNameMapTel2Ip_RemoveFromRight,
CallingNameMapTel2Ip_LeaveFromRight,
CallingNameMapTel2Ip_Prefix2Add,
CallingNameMapTel2Ip_Suffix2Add;
[ \CallingNameMapTel2Ip ]
Note: For a detailed description of this table, see 'Configuring SIP
Calling Name Manipulation' on page 294.
Destination Phone Number Manipulation for IP-to-Tel Calls Table
Web: Destination Phone
Number Manipulation Table
for IP > Tel Calls
EMS: SIP Manipulations >
Destination IP to Telcom
[NumberMapIP2Tel]
This table parameter manipulates the destination number of IP-to-Tel
calls. The format of this parameter is as follows:
[NumberMapIp2Tel]
FORMAT NumberMapIp2Tel_Index =
NumberMapIp2Tel_DestinationPrefix, NumberMapIp2Tel_SourcePrefix,
NumberMapIp2Tel_SourceAddress, NumberMapIp2Tel_NumberType,
NumberMapIp2Tel_NumberPlan, NumberMapIp2Tel_RemoveFromLeft,
NumberMapIp2Tel_RemoveFromRight,
NumberMapIp2Tel_LeaveFromRight, NumberMapIp2Tel_Prefix2Add,
NumberMapIp2Tel_Suffix2Add,
NumberMapIp2Tel_IsPresentationRestricted;
[\NumberMapIp2Tel]
For example:
NumberMapIp2Tel 0 = 01,034,10.13.77.8,$$,0,$$,2,$$,667,$$;
NumberMapIp2Tel 1 = 10,10,1.1.1.1,255,255,3,0,5,100,$$,255;
Note: For a detailed description of this table, see 'Configuring
Source/Destination Number Manipulation' on page 287.
EMS: Perform Additional
IP2TEL Destination
Manipulation
Enables additional destination number manipulation for IP-to-Tel calls.
The additional manipulation is done on the initially manipulated
destination number, and this additional rule is also configured in the

AudioCodes Mediant 2000 Specifications

General

Brand	AudioCodes
Model	Mediant 2000
Category	Gateway
Language	English