User's Manual 676 Document #: LTRT-68822
Mediant 2000
Parameter Description
DestinationManipulation]
manipulation table (NumberMapIP2Tel parameter). This enables you to
configure only a few manipulation rules for complex number
manipulation requirements (that generally require many rules).
 [0] = Disable (default)
 [1] = Enable
Destination Phone Number Manipulation for Tel-to-IP Calls Table
Web: Destination Phone
Number Manipulation Table
for Tel > IP Calls
EMS: SIP Manipulations >
Destination Telcom to IPs
[NumberMapTel2IP]
This table parameter manipulates the destination number of Tel-to-IP
calls. The format of this parameter is as follows:
[NumberMapTel2Ip]
FORMAT NumberMapTel2Ip_Index =
NumberMapTel2Ip_DestinationPrefix, NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress, NumberMapTel2Ip_NumberType,
NumberMapTel2Ip_NumberPlan, NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight, NumberMapTel2Ip_Prefix2Add,
NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID, NumberMapTel2Ip_
SrcIPGroupID;
[\NumberMapTel2Ip]
For example:
NumberMapTel2Ip 0 = 01,$$,*,0,0,2,$$,$$,971,$$,$$,$$,$$;
NumberMapTel2Ip 1 = 10,10,*,255,255,3,0,5,100,$$,255,$$,$$;
Note: For a detailed description of this table, see 'Configuring
Source/Destination Number Manipulation' on page 287.
Source Phone Number Manipulation for IP-to-Tel Calls Table
Web: Source Phone
Number Manipulation Table
for IP > Tel Calls
EMS: SIP Manipulations >
Source IP to Telcom
[SourceNumberMapIP2Tel
]
This parameter table manipulates the source number for IP-to-Tel calls.
The format of this parameter is as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
For example:
SourceNumberMapIp2Tel 0 = 22,03,$$,$$,$$,$$,2,667,$$,$$;
SourceNumberMapIp2Tel 1 = 034,01,1.1.1.1,$$,0,2,$$,$$,972,$$,10;
Note: For a detailed description of this table, see 'Configuring
Source/Destination Number Manipulation' on page 287.
EMS: Perform Additional
IP2TEL Source
Manipulation
[PerformAdditionalIP2TEL
SourceManipulation]
Enables additional source number manipulation for IP-to-Tel calls. The
additional manipulation is done on the initially manipulated source
number, and this additional rule is also configured in the manipulation
table (SourceNumberMapIP2Tel parameter). This enables you to
configure only a few manipulation rules for complex number
To Next Page
Loading...
Need help?
General
