Maintenance-Object Repair Procedures
555-233-143
8-292 Issue 1 May 2002
Aux Data XX
Aux Data YY
Table 8-127. Aux Data XX for ATM Board Error Query Test (#1259)
If XX= Then
1 ATM framer chip failed
2 NCE chip failed
3 LANHO critical error
4 TDM Programmable Logic Device failed
5 Every on-board DSP failed
6 Receive Network Processor failed
7 Transmit Network Processor failed
8 Memory read failed
9 Dual UART chip failed
10 LANHO receive parity error
11 LANHO FIFO overflow error
12 LAN bus time out
13 LANHO Xmit FIFO overflow error
14 One or more on-board DSPs failed
Continued on next page
Table 8-128. Aux Data YY for ATM Board Error Query Test (#1259)
If YY= Then
15 Back plane clock failed
16 Loss of signal
17 Loss of frame
18 MS alarm indication signal error
19 MS remote defect indicator error
20 Loss of pointer
21 Path signal level mismatch
Continued on next page
To Next Page
Loading...
