netstat ip-route
Issue 1 May 2002
7-237555-233-143
netstat ip-route
This command displays the routing tables that are resident in the C-LAN circuit
pack. With the “board” option, the command
netstat ip-route board UUCss
displays the routing tables that are resident on the specified C-LAN circuit pack.
Output
The following example shows the output from the netstat ip-route command.
Field Descriptions
Table 7-35. netstat ip-route command parameters
Action/ Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
netstat
ip-route
board
UUCss
Example:
netstat ip-route board
01A03
init
inads
craft
none none
Destination
Fixed field giving the destination of the route. The destination is a name
administered on the Node Name form which can include the keyword
“Default,” indicating the default route.
Gateway
The node name of the Gateway by which the Destination can be reached.
The Gateway must be a name administered on the Node Name form.
C-LAN Board/Pt
The circuit pack location for the circuit pack that provides the interface for
the route.
Interface
■ pppn represents one of the PPP interfaces on the C-LAN, which is
administered as port n+1.
■ cpm0 represents the ethernet interface on the C-LAN which is
administered as port 17.
■ lo0 represents the loopback interface on the C-LAN which does not
need to be administered.
netstat ip-route page 1 of xxx
IP ROUTING - C-LAN
Destination Gateway C-LAN Bd/Pt Interface
1:___.___.___.___ ___.___.___.___ 01C0514 ppp13
2:___.___.___.___ ___.___.___.___ 01C0517 cmp0
3:___.___.___.___ ___.___.___.___ 01C0518 lo03
To Next Page
Loading...
