reset login-ID n
Issue 1 May 2002
7-261555-233-143
reset login-ID n
This command displays is used to terminate a SAT session on a TCP/IP link, or
other traditional connection. In the command,
n represents the SAT session ID
that can be obtained from the
status logins command that is used to display all
active SAT sessions. If the reset command fails, an appropriate error code is
printed out.
Output
The following example shows the output from the reset login-ID 9 command.
Table 7-40. reset login-session command parameters
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
reset
login-ID
n Number of the SAT
session, 0-999.
Example:
reset login-ID 9
init none none
reset login-ID 9
Command successfully completed
Command:
To Next Page
Loading...
