Avaya S8700 - LOG-SVN (Login Security Violation)

Maintenance-Object Repair Procedures
555-233-143
8-1022 Issue 1 May 2002
LOG-SVN (Login Security Violation)
The Security Violation Notification (SVN) feature provides notification when the
number of failed attempts to access the system administration/maintenance
interface meets or exceeds customer administered threshold parameters.
A major alarm is logged whenever a security violation is detected involving an
Avaya services login ID and that login ID has been disabled as a result of
detection of the security violation. The capability to disable a login ID following
detection of a security violation involving that login ID is administrable on a per
login ID basis.
Refer to the DEFINITY ECS Administrator’s Guide for information about
administration required for the Security Violation Notification feature, and the
option to disable a login ID following detection of a security violation involving the
affected login ID.
MO’s Name (in
Alarm Log) Alarm Level
Initial SAT Command to
Run
1
1. Where <login ID> is the Avaya services login ID for which the security violation was detected. The Alt Name
field indicates the login ID associated with the security violation and the major alarm.
Full Name of MO
LOG-SVN MAJOR enable login login-ID Login Security Violation
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
list configuration license long – displays both
the active and
standby license files’
serial numbers
init
inads
draft
dadmin
super-user