Avaya S8700 - LIC-ERR (License-Error Mode)

Maintenance-Object Repair Procedures
555-233-143
8-1014 Issue 1 May 2002
LIC-ERR (License-Error Mode)
The LIC-ERR MO works in with the NO-LIC MO to look for any errors/violations
associated with a License file. Once a License file error occurs, LIC-ERR MO
logs the error, raises an alarm, and starts a timer that is associated with the error.
When the timer’s threshold has been exceeded, NO-LIC MO will cause Avaya
MultiVantage ™ to be restricted. All call origination will be restricted to outgoing
emergency numbers, incoming calls will be restricted to an Administration
(Attendant Console) number.
The license file is loaded onto a switch during initialization of the switch software,
restoration of translations, and periodically. After initialization, a query is made to
a software module called the License Server. This module:
■ Reads the serial number in a License file
■ Compares this file’s serial number to a serial number in hardware
■ Compares the file’s serial number with a running software version
and (if a match occurs) delivers permission to run to the MultiVantage software,
along with a new feature mask. The feature mask controls revenue-associated
options.
Error Log Entries and Test to Clear Values
MO’s Name
(in Alarm Log) Alarm Level
Initial SAT Command to
Run Full Name of MO
LIC-ERR MAJOR test license License-Error Mode
Error
Type
Aux
Data Associated Test Alarm Level
On/Off
Board Test to Clear Value
1 (a) MAJOR OFF See footnote
1
1. These error types can be cleared by providing the correct License file, per local instructions.
513 (b) None MAJOR OFF See footnote
1
769 (c) None MAJOR OFF See footnote
1
1281 (d) None MAJOR OFF See footnote
1
1537 (e) None MAJOR OFF See footnote
1