Avaya S8700 - DIG-IP-STN (Digital IP Station)

DIG-IP-STN (Digital IP Station)
Issue 1 May 2002
8-531555-233-143
DIG-IP-STN (Digital IP Station)
The Softphone has some level of existing DCP maintenance in the form of audits,
and updates. In addition, it also has error log entries and test to clear values.
In addition this MO covers a new Avaya voice terminal that communicates to the
switch via an IP LAN. This type of terminal, referred to as an IP phone is made up
of the 46XX line of terminals. This terminal emulates DCP signaling carried over
TCP.
This station type is not attached to a port board. Insertion of the station is not
driven by board insertion, rather it is driven by successful registration of the
endpoint. It is maintained via a set of explicit TCP/IP ping requests and errors
reported by the User Manager software, which terminates the H.323 signaling
portion of each endpoint. The MO follows standard maintenance methodology
and supports test, busyout, release and status commands.
Maintenance for Softphone includes Error Log Entries and Test to Clear Values.
See Table 8-213.
MO’s Name (in
Alarm Log) Alarm Level
Initial SAT Command to
Run Full Name of MO
DIG-IP-STN WARNING test station extension Digital IP Station
Table 8-213. DIG-IP-STN Digital IP Station Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
00Any Any test station extension
1 (a) Registration Status Inquiry
(#1372)
WARNING OFF
18 (b) 0 busyout port | station WARNING OFF release port |station
257 (c) Signaling Path PING test
(#1373)
WARNING OFF
(d) Digital Terminal Lamp
Update (#16)
WARNING OFF
(e) Digital Terminal Audit
Update (#17)
WARNING OFF
513 (f) Any Station Digital AUDIT test
(#17)
WARNING OFF test port | station
1281 (g) Any Station Digital AUDIT test
(#17)
WARNING OFF test port | station
Continued on next page