Avaya S8700 - Test License

test license
Issue 1 May 2002
7-447555-233-143
test license
test license [short]
Use this command to run a license file check on the server so you do not have to
wait for the next hourly update to see if certain license errors have been cleared.
This command is available to the following logins: init, inads, craft, and dadmin. In
addition, test license is available to the customer superuser login if the Processor
and System MSP feature is active on the switch, and the customer superuser
login is administered on the permissions form.
This command is available for both S8700 Multi-Connect and S8700 IP Connect
configurations. The [long] parameter is not available for the S8700 media server
configurations.
Output
Field Descriptions
Port Port address (cabinet-carrier-slot-circuit)
Maintenance
Name
The name of the maintenance object
Alt. Name Alternative way to identify maintenance objects
Test No. The test being executed
Result Test result:
Pass=License Normal mode;
Fail=License Error (Error Code 1) or No License (Error Code 2)
Error Code Code for the reason for failure or abort. See the list of the codes by
test number for each MO.
test license
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
LIC-ERR 1484 PASS
Command successfully completed