Avaya S8700 - Status Processor-Channel

Maintenance Commands
555-233-143
7-378 Issue 1 May 2002
status processor-channel
status processor-channel channel# [print]
The status processor-channel command displays the status of the specified
processor channel and the values of its various counters. A processor channel is
one of 128 logical channels associated with an SCI link. Each processor channel
terminates in the switch processing element with a session.
Parameters
Output
The following display shows a typical result when status processor-channels 1
is entered.
channel# The processor channel number (1-128).
Channel Number
The processor channel number 1-128.
Channel Status
The state that the channel is in: 1-16. The following describes the various
channel states.
Reset Count
The number of times that the reset has been issued for this channel.
Message Buffer
Number
The number of message buffers currently allocated for communications on
this channel.
Link Number
The physical interface link associated with the channel.
Retransmission
Count
The number of times that message retransmission has occurred.
status processor-channels 1
PROCESSOR CHANNEL STATUS
Channel Number: 1
Channel Status: 11: Administered but not connected
Reset Count: 0
Message Buffer Number: 0
Link Number: 3
Retransmission Count: 0