Avaya S8700 - List Cabinet

list cabinet
Issue 1 May 2002
7-161555-233-143
list cabinet
list cabinet [print | schedule]
The list cabinet command displays the type, layout, room, floor, building,
operational carriers and port network number for each cabinet in the system. This
command is useful when the port network number is needed for another
command entry and only the cabinet number is known.
Output
The following display shows a typical result when list cabinet is entered. For
S8700 IP Connect configurations, the field option rack-mount-stack (rmc) is
added to the
Cabinet Layout field.
Field Descriptions
Number
The administered number of the cabinet.
Type
The type of cabinet (PPN or EPN).
Layout
The layout of the cabinet. The option rmc is the only option displayed for the
Layout field for S8700 IP Connect.
Room
Room where cabinet resides, if administered on the cabinet form.
Floor
Floor where cabinet resides, if administered on the cabinet form.
Building
Building where cabinet resides, if administered on the cabinet form.
A B C D E
The letter designation of each carrier. For each carrier the port network
number is given (
PN #). If the carrier is a switch node this number is
preceded by
SN.
list cabinet
CABINET REPORT
No Type Layout Room Floor Building Loc A B C D E
1 EPN rmc 1 PN 01 PN 01 PN 01
2 EPN rmc 1 PN 02 PN 02 PN 02
13 EPN rmc 1 PN 13
26 EPN rmc 1 PN 26
32 EPN rmc 1 PN 32 PN 32 PN 32
64 EPN rmc 1 PN 64 PN 64 PN 64