Avaya S8700 - Change Ipserver-Interface

change ipserver-interface
Issue 1 May 2002
7-67555-233-143
change ipserver-interface
change ipserver-interface n
Use this command to change the QoS parameters and change the IPSI board.
This command applies to both S8700 Media Server Multi-Connect and IP
Connect Configurations.
Parameters
Examples
change ipserver-interface 2
Output (for S8700 Multi-Connect)
n port network (1-64)
change ipserver-interface 2 Page 1 of 1
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 2
Primary IPSI QoS Parameters
------------ --------------
Location: 2AXX Call Control 802.1p: 6
Host: ipsi-A02a Call Control DiffServ: 46
DHCP ID: ipsi-A02a
Secondary IPSI
--------------
Location: 2B01
Host: ipsi-A02b
DHCP ID: ipsi-A02b