Maintenance-Object Repair Procedures
555-233-143
8-146 Issue 1 May 2002
ASAI-EPT
The maintenance strategy for this endpoint MO is built on maintenance facilities
offered in the Avaya ISDN-BRI protocol and in the ASAI adjuncts. Currently there
are no facilities in the protocol that provide for maintenance of set data features.
The TN800 is a PC-based platform that allows interaction of multiple applications
with an S8700 Multi-Connect system at any time. MultiVantage software (Native
mode) supports emulation of three types of port MOs on this board. The type of
ports to be emulated is defined by the applications running on the TN800.
NOTE:
If the TN800 is emulating BRI, the software/firmware supports up to
12 ports, but only 8 of the 12 ports can be administered at any one time.
MO’s Name (in
Alarm Log) Alarm Level Initial Command to Run Full Name of MO
ASAI-EPT MAJOR
1
1. The alarm level for ASAI adjuncts is administered using the set options command. The alarm
level can be set independently for on- and off-board alarms to WARNING, MINOR, or MAJOR for
every ASAI adjunct in the system.
test station extension ASAI-Adjunct
To Next Page
Loading...
