Avaya S8700 - Status Port-Network

Maintenance Commands
555-233-143
7-374 Issue 1 May 2002
status port-network
This command provides additional information about the status of a specified port
network.
Output
The following example shows the output for the status port-network command
for an S8700 Multi Connect.
Since the PKTINTs are moved to the IPSIs in PNs for S8700 Multi-Connects, this
command shows the location and state of the links, whether active or failed, and
the total.
Table 7-54. status port-network command parameters
Action/ Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status port-network print init
inads
craft
none none
status port-network
PORT NETWORK STATUS
Major Minor Warning Carrier PN Control FIBER-
PN Alarms Alarms Alarms Locs Active Standby LINK Endpoints Mode
1 1 0 282 01A up up 1 A-PNC 01A01-01E04 active
01B 1 B-PNC 01B02-03E04 standby
TDM Service Control Dedicated TONE/ Service System System
Bus State Channel Tones CLOCK State Clock Tones
A in y n 01B in standby standby
B in n y 01A in active active
Service Major Minor Bus Open Bus
PKT State Alarms Alarms Faults Leads
1 in n n 0 0