Avaya S8700 - Test Eda-External-Device-Alrm

test eda-external-device-alrm
Issue 1 May 2002
7-429555-233-143
test eda-external-device-alrm
test eda-external-device-alrm all | physical-location [repeat-number | clear][
schedule]
This test performs hardware diagnostic tests on the alarm port for either an
individual or every external device.
If all is entered, the
test eda-external-device-alrm command performs a
hardware diagnostic test on every administered external device’s alarm port . If
an administered external device’s alarm port is entered, this command performs a
hardware diagnostic test on that port. The test PASSES if the external device is
not reporting an external device alarm and FAILS if the external device is
reporting an external device alarm. If the technician specifies a port, it must be
administered as an external device’s alarm port either on a maintenance board or
on an analog line board.
Defaults
The default for this command is a repeat of 1.