Maintenance Commands
555-233-143
7-434 Issue 1 May 2002
test failed ip-network-region
test failed ip-network-region [all | xxx]
The test failed ip-network-region command initiates a real-time ping test for
failed network-regions connections. The default is ALL failed ip-network regions
or test failed ip-network-region
xxx (where xxx is in the range of 1-250 for r and
1-80 for si/csi/d).
Output
The following display shows a typical result when test failed-ip-network-region
is entered.
[field]
[description]
NR-CONN – represents the Maintains Object Name for this test
XXX-YYY – represents the pair of failed network regions under test.
ZZZ – represents the test number (to be assigned by the maintenance developer)
test failed-ip-network-region
No failures for indicated region(s)
Command:
To Next Page
Loading...
