Avaya S8700 - EXT-DEV ADMIN? y (External Device Alarm)

EXT-DEV ADMIN? Y (External Device Alarm)
Issue 1 May 2002
8-827555-233-143
EXT-DEV ADMIN? Y (External Device
Alarm)
NOTE:
Use this MO when the External Device Alarm Admin? field on the change
system-parameters customer-options form is set to (y). You must have
INADS or INIT login permissions to administer EXT-DEV Alarm.
Each PN’s Maintenance circuit pack has two alarm ports that connect to such
external devices as uninterruptible power supplies (UPSs) or adjuncts (e.g.,
AUDIX).
Certain conditions on the external device close the contacts on the alarm leads to
notify the switch that in turn originates an EXT-DEV alarm. One set of leads
generates a major alarm; the other set generates a minor alarm.
The special locations UUmajor and UUminor are used to designate the major or
minor Maintenance board’s alarm connection for cabinet UU. The major/minor
designation specifies the port, not the alarm level associated with the connection;
for example, the “major” port can be administered as a major, minor, or warning
alarm, and the “minor” port can be administered as a major, minor, or warning
alarm. In addition Analog line ports can also be administered as external device
alarms.
NOTE:
An unadministered Maintenance board’s external device alarm port, that is
sensing a contact closure will have an entry in the Error Log and in the
Alarm Log. The alarm receiver will not receive warning alarms.
MO’s Name (in
Alarm Log)
Alarm
Level Initial SAT Command to Run
1
1. UU is a cabinet number determined in the Port field of the Alarm or Error Log.
Full Name of MO
EXT-DEV MAJOR test eda-external-device-alrm
physical-location
External Device Alarm
EXT-DEV MINOR test eda-external-device-alrm
physical location
External Device Alarm
EXT-DEV WARNING test eda-external-device-alrm
physical-location
External Device Alarm