Avaya S8700 - List Disabled-Mos

list disabled-MOs
Issue 1 May 2002
7-169555-233-143
list disabled-MOs
list disabled-MOs [print | schedule]
This command displays a list of the maintenance objects that have been disabled
with the
disable MO, disable all, or disable MO-all command (not available to
craft logins), as well as whether or not the command has been run. Use
display
disabled-tests
for numbers of tests that have been disabled.
Output
The following display shows a typical result when list disabled-MOs is entered
and no MOs are currently disabled.
Field Descriptions
Maintenance
Name
Type of maintenance object(s) disabled. “ALL” is displayed if every MO is either
enabled or disabled.
Location
The physical location (cabinet-carrier-[slot-circuit]) of the maintenance objects.
Blank when “ALL” is displayed under Maintenance Name.
Status
Whether the MOs displayed are enabled or disabled.
list disabled-MOs
DISABLED MAINTENANCE OBJECT INFORMATION
Maintenance Name Location Status
ALL Enabled
Command successfully completed