Avaya S8700 - Status Link N

status link n
Issue 1 May 2002
7-359555-233-143
status link n
status link n (with C-LAN circuit pack–Ethernet connection)
This command displays:
■ static information about the link
■ the data extension and port used, connect speed, and protocol information
■ a counter of CHAP failures for PPP links
■ time information for PPP and Ethernet links (includes the time of the last
reset, the last hour start time, and end time for the error counter statistics).
■ the type and number of active applications
The same information that is displayed by the status link command can also be
invoked with
status clan-port or netstat link n for C-LAN links.
Output
The following example shows page 1 of the output from the status link n
command (si w/ TN794 Net Packet/Packet Interface circuit pack).
Table 7-52. status link n command parameters
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status link n Number of the
administered link.
Example: status link 1
init
inads
craft
none none