Avaya S8700 - Status Switch-Node

status switch-node
Issue 1 May 2002
7-393555-233-143
status switch-node
status switch-node SN# [print]
NOTE:
This command is not valid for S8700 IP Connect configurations.
This command displays the operational status and attributes of the user specified
switch node. The operational status of the active and standby Switch Node Clock
(SNC) circuit packs for the switch node are displayed along with any alarms
logged against the specified switch node.
Parameters
Output
The following display shows a typical result when status switch-node is entered.
SN# Normally switch node 1 resides in the PPN cabinet, and switch node 2, if present,
resides in the nearest PN cabinet. The switch node number defaults to 1.
status switch-node 1 page 1 of 1
switch node STATUS
Major Minor Warning Active SNC Standby SNC
Switch Node Location Mode Alarms Alarms Alarms Location Location
1 A-PNC 01E active 0 0 0 01E10 01E12
1 B-PNC 01D standby 0 1 2 01D10 01D12